Debian includes several packages which provide tools for managing a  firewall with iptables installed as part of the base system. It can be  complicated for beginners to learn how to use the iptables tool to  properly configure and manage a firewall, but UFW simplifies it.

UFW  (Uncomplicated Firewall) is a user-friendly front-end for managing  iptables firewall rules and its main goal is to make managing iptables  easier or as the name says uncomplicated.

In this tutorial, we will show you how to set up a firewall with UFW on Debian 9.


Before proceeding with this tutorial, make sure the user you are logged in as has sudo privileges.

Install UFW

UFW is not installed by default in Debian 9. You can install the ufw package by typing:

sudo apt install ufw

Check UFW Status

Once the installation process is complete, you can check the status of UFW with the following command:

sudo ufw status verbose

The output will look like this:

Status: inactive

UFW is disabled by default. The installation will not activate the firewall automatically to avoid a lockout from the server.

If UFW is activated, the output will look similar to the following:

UFW Default Policies

By  default, UFW will block all of the incoming connections and allow all  outbound connections. This means that anyone trying to access your  server will not be able to connect unless you specifically open the  port, while all applications and services running on your server will be  able to access the outside world.

The default polices are defined in the /etc/default/ufw file and can be changed using the sudo ufw default <policy> <chain> command.

Firewall  policies are the foundation for building more detailed and user-defined  rules. In most cases, the initial UFW Default Policies are a good  starting point.

Application Profiles

When installing a package with apt it will add an application profile to /etc/ufw/applications.d directory that describes the service and contains UFW settings.

To list all application profiles available on your system type:

sudo ufw app list

Depending on the packages installed on your system the output will look similar to the following:

Available applications:
  Postfix SMTPS
  Postfix Submission

To find more information about a specific profile and included rules, use the following command:

sudo ufw app info OpenSSH
Profile: OpenSSH
Title: Secure shell server, an rshd replacement
Description: OpenSSH is a free implementation of the Secure Shell protocol.


AThe output above tells us that the OpenSSH profile opens port 22.

Allow SSH Connections

Before enabling the UFW firewall first we need to allow incoming SSH connections.

If  you’re connecting to your server from a remote location, which is  almost always the case and you enable the UFW firewall before explicitly  allow incoming SSH connections you will no longer be able to connect to  your Debian server.

To configure your UFW firewall to allow incoming SSH connections, run the following command:

sudo ufw allow OpenSSH
Rules updated
Rules updated (v6)

If the SSH server is listening on a port other than the default port 22, you will need to open that port.

For example, your ssh server listens on port 8822, then you can use the following command to allow connections on that port:

sudo ufw allow 8822/tcp

Enable UFW

Now that your UFW firewall is configured to allow incoming SSH connections, you can enable it by running:

sudo ufw enable
Command may disrupt existing ssh connections. Proceed with operation (y|n)? y
Firewall is active and enabled on system startup

You will be warned that enabling the firewall may disrupt existing ssh connections, just type y and hit Enter.

Allow connections on other ports

Depending  on the applications that run on your server and your specific needs  you’ll also need to allow incoming access to some other ports.

Below are several examples of how to allow incoming connections to some of the most common services:

Open port 80 - HTTP

HTTP connections can be allowed with the following command:

sudo ufw allow http

Instead of the http profile, you can use the port number, 80:

sudo ufw allow 80/tcp

Open port 443 - HTTPS

HTTP connections can be allowed with the following command:

sudo ufw allow https

To achieve the same instead of https you can use the port number, 443:

sudo ufw allow 443/tcp

Open port 8080

If you run Tomcat or any other application that listens on port 8080 you can allow incoming connections with:

sudo ufw allow 8080/tcp

Allow Port Ranges

With UFW you can also allow access to port ranges. When allowing port ranges with UFW, you must specify the protocol, either tcp or udp.

For example, to allow ports from 7100 to 7200 on both tcp and udp, run the following command:

sudo ufw allow 7100:7200/tcp

Allow Specific IP Addresses

If you want to allow access on all ports from a specific IP address, use the ufw allow from command followed by the IP address:

sudo ufw allow from

Allow Specific IP Addresses on Specific port

To  allow access on a specific port, let’s say port 22 from your work  machine with IP address of use the following command:

sudo ufw allow from to any port 22

Allow Subnets

The  command for allowing connection to a subnet of IP addresses is the same  as when using a single IP address, the only difference is that you need  to specify the netmask. For example, if you want to allow access for IP  addresses ranging from to to port 3360 (MySQL) you can use this command:

sudo ufw allow from to any port 3306

Allow Connections to a Specific Network Interface

To allow access on a specific port let’s say port 3360 only to specific network interface eth2, use allow in on and the name of the network interface:

sudo ufw allow in on eth2 to any port 3306

Deny connections

The default policy for all incoming connections is set to deny which means that UFW will block all incoming connection unless you specifically open the connection.

Let’s say you opened the ports 80 and 443 and your server is under attack from the network. To deny all connections from , use the following command:

sudo ufw deny from

If you only want to deny access to ports 80 and 443 from use:

sudo ufw deny from to any port 80

Writing deny rules is the same as writing allow rules, you only need to replace allow with deny.

Delete UFW Rules

There are two different ways to delete UFW rules, by rule number and by specifying the actual rule.

Deleting UFW rules by rule number is easier especially if you are new to UFW.

To  delete a rule by a rule number first you need to find the number of the  rule you want to delete. To do that run following command:

sudo ufw status numbered
Status: active

     To                         Action      From
     --                         ------      ----
[ 1] 22/tcp                     ALLOW IN    Anywhere
[ 2] 80/tcp                     ALLOW IN    Anywhere
[ 3] 8080/tcp                   ALLOW IN    Anywhere

To delete rule number 3, the rule that allows connections to port 8080, you can use the following command:

sudo ufw delete 2

The second method is to delete a rule by specifying the actual rule. For example, if you added a rule to open port 8069 you can delete it with:

sudo ufw delete allow 8069

Disable UFW

If for any reason you want to stop UFW and deactivate all rules run:

sudo ufw disable

Later if you want to re-enable UTF and activate all rules just type:

sudo ufw enable

Reset UFW

Resetting  UFW will disable UFW, and delete all active rules. This is helpful if  you want to revert all of your changes and start fresh.

To reset UFW simply type in the following command:

sudo ufw reset


You  have learned how to install and configure UFW firewall on your Debian 9  machine. Be sure to allow all incoming connections that are necessary  for proper functioning of your system, while limiting all unnecessary  connections.

If you have questions, feel free to leave a comment below.